Reasons for the wear of crusher blades and solutions

Problem1：Excessive crusher blades wear.

Solution: Replace the Plastic crusher blades promptly or change the cutting edges.

Problem2：Insufficient cutting fluid flow or incorrect method of adding, leading to the accumulation of heat and cold damage to the Granulator Blades.

Solution: Increase the flow of cutting fluid. Properly position the cutting fluid nozzles. Use effective cooling methods such as spray cooling to improve cooling efficiency. Adopt dry cutting to reduce thermal impact on the Shredder Cutter Blades.

Problem 3: Incorrect installation of plastic crushing machine blades, such as installing circular blades that are too high or too low.

Solution: Reinstall the crusher blades.

Problem4：Poor rigidity of the processing system, resulting in excessive cutting vibrations.

Solution:
1. Increase auxiliary support for the workpiece to improve workpiece clamping rigidity.
2. Reduce the overhang length of the Plastic Grinder Blades.
3. Properly reduce the back angle of the mechanical blades.
4. Adopt other vibration damping measures.